Filter by manufacturer
Material
Full strength
Skin formation
Type of solvent
60% strength in 20 minutes
Adhesion
Adhesive will harden fully
Appearance
Appearance
Appearance and Type
Appearance:
Appearence
Apperance
Apperanvce
Applicatio
Application
Application
Application method
Application temperature
Application temperature
Application Temperature
Application temperature range
Application temperature range
Application Temperature:
Applications
Applications
Base/Type
Boiling point/range
Can be cut
Cap Colour
Cap colour
Cold Resistance
Colour
Colour
Colour – Prior to curing
Colour – Prior to mixing
Colour – Upon curing
Completely dry Time
Continous temperature Rating
Continuous Temperature rating
Continuous temperature Rating
Contious temperature rating
Coverage
Coverage
Coverage – 280ml cartridge
Coverage/kg
Coverage/kg
Coverage/L
Curing time
Curing time Approximately
Density
Density
Density @ 20 °C
Density 1.62 g/cm3 at 23°C
Density Approx
Density Approximately 1.06g/cm³
Density:
DENSİTY: 17±2 kg/m3
Drying time
Drying Time
Drying time
Final cure
Final setting time
Full cure
Full Cure
Full cure time
Full strength
Full strength
Full strength time
Full tensile strength
Gap filling properties
Handling bond in 4½ minutes
Handling bond time
Hardens in
Hardens in
Heat resistance
Heat Resistance
Heat resistance
Heat Resistance
Heat resistant
Heat resistant
Initial boiling point and boiling range:
Maimum temperature resistance
Main component
Materials bonded
Maximum bond strength (
Maximum Continuous high temperature
Maximum Temperature resistance
Melting point/freezing point:
Minimum Application Temperature
Minimum application temperature
Oil resistance
pH
PH
PH
pH:
Pressing and Clamping time
Product Colour
Product colour
Quantity
Ready-to-cut time
Recommended Gap
Recommended gap
Recommended maximum gap
Service Temperature
Service temperature range
Service temperature range
Setting time
Setting time
Setting/drying time
Size
Size
SIze
Solids
Spread Rate
Spread rate
Spread rate
State
Tack free time:
Tack off time
Temperature resistance
Temperature resistance
Temperature Resistance
Temperature resistance up to 180°C
Temperature resistance
Temperature Resistance:
Time to full cure
Time to initial set
Time to initial set Min
Touch dry time
Touch dry time
Touch drying
Type
Type
Type
Type of Application
Type Water based
Viscosity Paste
Water resistance
Water resistance
Water Resistance
White point:
Will set in about 14 minutes.
BOSTIK SUPER EPOXY 2x16ml ADHESIVE
- Fast bonding for quick repairs
- Ideal for emergency DIY repair work in and around the home
- Suitable for interior and exterior applications
$4.42
GENKEM MOSAIC 5/7kg WOOD BLOCK ADHESIVE
- Ideal the installation of wood-mosaics
- Can be used for the installation of cork tiles
- High quality
$28.52
GLUE DEVIL 1 kg CARPET AND VINYL ADHESIVE
- Quick-drying adhesive with an aggressive tack
- Used to stick down carpet or vinyl tiles.
- Easy and safe to use, with low odour – Ideal for use in occupied buildings.
$7.68
GLUE DEVIL 500ml CONTACT ADHESIVE
- General purpose adhesive
- Offers superior bond strength without requiring clamping or sustained pressure
- Water and heat resistant up to 80°C
$5.42
GLUE DEVIL GD43 6 ml NUTLOCK
- Prevents loosening of threaded parts due to vibration.
- Locks bolts and nuts up to 20mm diameter.
- Chemical resistant against fuels,lubricants and gases.
$2.13
GLUEDEVIL 100ml WOOD GLUE
- Very good heat resistance
- Good water resistance
- Excellent for both soft woods and hard woods
$1.77
GLUEDEVIL 12x100mm GLUE STICKS
- Sets quickly
- Excellent adhesion for bonding plastic, metal, ceramics.
- Can be applied using hot melt glue guns
$1.44
GLUEDEVIL 12x150mm GLUE STICKS
- Sets quickly
- Excellent adhesion for bonding plastic, metal, ceramics.
- Can be applied using hot melt glue guns
$1.44
GLUEDEVIL 12x300mm 1kg GLUE STICKS
- Sets quickly
- Excellent adhesion for bonding plastic, metal, ceramics.
- Can be applied using hot melt glue guns
$10.62
