Filter by manufacturer
Material
Storage
Flexible at temperatures as low as
Finish
Full strength
Scraper Material
Skin formation
Type of solvent
60% strength in 20 minutes
Aapplication
Acidity
Adhesion
Adhesive style
Apllication
Apllication
Appearance
Appearance
Appearance and Type
Appearance:
Appearence
Apperance
Apperanvce
Applicable Power
Applicatio
Application
Application
application
Application Environment
Application method
Application methods
Application methods
Application Rate
Application temperature
Application temperature
Application Temperature
Application temperature range
Application temperature range
Application Temperature:
Application Temperature:
Application type
Applications
Applications
Applicatiuon
Appliction
Appllication
Base/Type
Blade Length
Blade material
Boiling Point
Boiling Point
Boiling point
Boiling point/range
Bristle
Bristle material
Bristle type
Bristle type
Bristles
Bristles
Brush size
Brush Size
Brush sizes
Can be cut
Cap Colour
Cap colour
Capacity
Capacity
Catridges sizes
Clean Up
Cleaning
Cleaning
Cold Resistance
Color
COlor
Color
Colour
Colour
Colour
Colour – Prior to curing
Colour – Prior to mixing
Colour – Upon curing
Colour / Finish
Colour/Finish
Complete Curing (20°C):
Completely dry Time
Composition
compressive strength at 25°C
Compressive strength at 25°C of 70 MPa
Contents
Continous temperature Rating
Continuous Temperature rating
Contious temperature rating
Coverage
Coverage
Coverage – 280ml cartridge
Coverage (280ml cartridge)
Coverage (280ml catridge)
Coverage (90ml cartridge)
Coverage (90ml tube)
Coverage for 280ml cartridge
Coverage per litre
Coverage/kg
Coverage/kg
Coverage/L
Cure Time
Curing time
Curing time
Curing time Approx
Curing time Approximately
Density
Density
Density
Density (g/cm³)
Density @ 20 °C
Density 1.62 g/cm3 at 23°C
Density Approx
Density Approximately 1.06g/cm³
Density:
DENSİTY: 17±2 kg/m3
Disposal
Dry time
Dry time
Drying
Drying
Drying Time
Drying Time
Drying time
Drying time
Dust dry
Final cure
Final setting time
Finisg
Finish
Finish
FInish
FInish
Flamablity
Flammable
Full cure
Full Cure
Full cure time
Full strength
Full strength
Full strength time
Full tensile strength
Gap filling properties
Handle
Handle material
Handle Material
Handle Material
Handle materiual
Handling bond in 4½ minutes
Handling bond time
Hard dry
Hardens in
Hardens in
Health
Health & Safety
Heat resistance
Heat resistance
Heat resistance
Heat Resistance
Heat resistance
Heat Resistance
Heat resistant
Heat resistant
Indoor/outdoor
Indoor/Outdoor
Initial boiling point and boiling range:
Maimum temperature resistance
Main component
Material
Materials bonded
Maximum bond strength (
Maximum Contineuos heat
Maximum Continuous high temperature
Maximum Temperature resistance
Maximum temperature resistance
Melting point/freezing point:
Minimum Application Temperature
Minimum application temperature
Mix ratio
Oil resistance
Operating Temperature
Operating temperature
Operating Temperatures
Operating temperatures
Overcoating Time
Overcoating Time
Paint
Paint Brush Size
Paint type
Perfomance
pH
PH
PH
pH:
Pressing and Clamping time
Product Colour
Product colour
Quality
Quantity
Ready-to-cut time
Recoat
Recoat
Recoat time
Recoat Time
Recoating
Recoating
Recoating time
Recoating Time
Recoating Time
Recoating time
Recommended Gap
Recommended gap
Recommended maximum gap
Roll Length
Roller size
Safety
Scraper Material
Scraper Size
Service Temperature
Service Temperature
Service temperature range
Service temperature range
Set Time
Set time
Sets hard
Setting time
Setting time
Setting/drying time
Settting time
Shelf Life
Shelf life
Shelf life
Size
Size
SIze
Sizes
Skin Formation
Skin formation
Softening time
Solids
Solubility in Water
Solubility in water
Solubility In Water
Spread Rate
Spread rate
Spread rate
State
Storage
Storage Temperatue
Storage Temperature
Storage temperature
Surface dry
Tack free time:
Tack off time
Temperature resistance
Temperature Resistance
Temperature resistance
Temperature Resistance
Temperature resistance up to 180°C
Temperature resistance
Temperature Resistance:
Tensile Strength
Thickness
Thining
Thinner
Thinner
Thinning
Thinning
THinning
Time to full cure
Time to initial set
Time to initial set Min
Tintable
Touch dry
Touch Dry
Touch dry time
Touch dry time
Touch drying
Type
Type
Type
Type Neutral cure
Type of Application
Type of Paint
Type Water based
Use
Use
Viscosity Paste
Water resistance
Water resistance
Water Resistance
White point:
Will set in about 14 minutes.
18mm x 40m HIGH TEMPERATURE WHITE 100°C MASKING TAPE
- Used in automotive shops to mask off areas that should not be painted
- Peels away easily without leaving adhesive residue
- Can withstand temperature up to 100°C
$0.89
1Lt ROOFIX
- Compound for repairing loose ridge tiles
- Mends broken and cracked roof tiles
- Repairs broken earthenware pipes
$10.55
24mm x 40m HIGH TEMPERATURE WHITE 100°C MASKING TAPE
- Used in automotive shops to mask off areas that should not be painted
- Peels away easily without leaving adhesive residue
- Can withstand temperature up to 100°C
$1.17
250g FIBRE GLASS CHOPPED MATT
- Excellent flexibility
- Weather-resistant
- Ideal for use in aircrafts, boats, automobiles, bath tubs and enclosures
$2.56
48mm x 40m HIGH TEMPERATURE WHITE 100°C MASKING TAPE
- Used in automotive shops to mask off areas that should not be painted
- Peels away easily without leaving adhesive residue
- Can withstand temperature up to 100°C
$2.32
500g FIBREGLASS CHOPPED MATT
- Excellent flexibility
- Weather-resistant
- Ideal for use in aircrafts, boats, automobiles, bath tubs and enclosures
- Used for repair work
$5.13
